Skip to content


Home > Products > Temperature Controllers

Thermal Corporation Fuji PX series temperature controllers page banner

Thermal Corporation carries a broad selection of Fuji PX series temperature controllers for an accurate and cost effective way to control the temperatures of your process. If you have any questions, please give us a call at (800) 633-2962 or chat with us using the instant chat feature at the bottom right of the page.

Please Call for Pricing

photo of Fuji PX Series temperature controllers

Specifications Summary:

  • Universal process input
  • Auto manual operation with A/M key
  • Position feedback control
  • Smart ramp-soak with guaranteed soak
  • 8 PID palettes
  • PC program loader interface
  • 32-segment ramp/soak feature at no additional cost
  • Display blinks on alarm condition
  • Remote setpoint
  • Analog retransmission
  • Small size fits 1/16 DIN cut out (1-25/32″ x 1-25/32″) x 3-1/2″ deep

Type of Control

  • ON/OFF – heat is turned on when process temperature is below set point
  • PID – ( Proportional, Integral, Derivative ) with proportional control, the heater is turned on by the temperature controllers for a larger or smaller percent of time depending on the amount of heat needed.
  • Integral – an adjustment to remove the offset difference between the set point and the point at which the proportional control stabilizes.
  • Derivative – adjust the speed with which the control system responds to rapid changes in demand and also affects the control of overshoot.
  • Auto-tune-control – Controller automatically selects proper PID Values Self tunes – automatically tunes the temperature controllers under certain conditions.
  • Ramp to Set point – capability to ramp the effective set point towards the final target value at a predefined rate.

Inputs (Programmable)

  • Thermocouples J, K, R, B, S, T, E, N, and PLII
  • RTD Pt100
  • Voltage Input 1-5V DC
  • Current Input 4 – 20 mA DC
  • Full Auto-tune PID functions, self tune, fuzzy logic
  • Inputs: accepts most thermocouples, RTDs or current/voltage inputs
  • Output-relay contact, current or SSR drive output
  • Indication – 4-digit, 7 segment LED
  • Operates on any AC voltage from 100V to 240V
  • Very flexible and easy to use due to microprocessor control
  • Waterproof – conforms to NEMA 4X/IP66
  • Security Lock-Out to prevent unauthorized changes


  • Relay Contact 3 A@220V
  • Current Output 4-20 mA DC
  • SSR Driver
  • Optional 2nd Output for cooling


  • One Relay Contact Output
  • Programmable for absolute temperature or deviation from set point


  • ± (0.5% full scale + 1 digit)


  • Source 100-240V AC
  • Consumption 10 watts
  • Communications Option – RS485

Operating / Storage Conditions

  • Ambient Temp. 14° to 122°F
  • Storage Temp. -4° to 140° F
  • Relative Humidity 90% or less

Written by Jennifer Taylor & Shelby Reece
Date Published: 01.17.2014
Last Updated: 03.12.2020

澳洲8开奖结果时间 澳洲幸运5开奖历史 澳洲幸运10官方开奖